-
2024-1-17Lifting equipment operating procedures
Article 1: Various cranes should be equipped with signboards indicating mechanical performance, and winch limiters, load controllers, interlock switches and other devices should be installed as needed -
2024-1-16Main features of lifting equipment
1) Lifting equipment usually has a large structure and complex mechanism, and can complete lifting and horizontal movements. For example, the bridge crane can complete the three movements of lifting, -
2024-1-15Basic mechanism of lifting equipment
Various lifting equipment have different purposes and are very different in structure, but they all have a lifting mechanism to realize the basic action of lifting and lowering. Some lifting equipment -
2024-1-14Lifting equipment classification
Lifting equipment can be divided into light and small lifting equipment, lifts, cranes and overhead monorail systems according to different structures. 1) Light and small lifting equipment mainly incl -
2024-1-13How lifting equipment works
Most lifting equipment starts a vertical or vertical and horizontal working stroke after picking up materials. After arriving at the destination, it is unloaded, and then empty travels to the picking -
2024-1-12What is lifting equipment
The lifting equipment starts a vertical or vertical and horizontal working stroke after picking up the materials. After arriving at the destination, it is unloaded, and then it travels to the picking -
2024-1-11Precautions for safe use
1. The hook should be manufactured by a formal professional factory in accordance with the technical conditions and safety regulations of the hook. The product should have a quality certificate from t -
2024-1-10Hook scrap standards
The hook should be scrapped when one of the following conditions occurs: ①Cracks; ② The wear of dangerous sections reaches 10% of the original size; ③The opening is increased by 15% compared to the or -
2024-1-09Hook safety inspection
1. The hook used in the human-driven lifting mechanism shall be tested with 1.5 times the rated load as the test load. 2. The hook used in the power-driven hoisting mechanism shall be tested with 2 ti -
2024-1-08Dangerous section of hook
The hook has three dangerous sections. Special attention should be paid during inspection. As shown in the "Dangerous Section Diagram", the three dangerous sections of the hook are: (1) The -
2024-1-07Hook technical requirements
1. The purchase of hooks must have technical documents such as certificates from the manufacturer before use; hooks purchased by important departments such as railways, ports, etc. must be strictly in -
2024-1-06Introduction and classification of hooks
The hook, also known as lifting hook in English, is the most common type of spreader in lifting machinery. The hook is often suspended on the wire rope of the hoisting mechanism with the help of pulle