Knowledge of cranes
-

2026-10-23Electric Hoist Trolley and Beam Fit Checks
Check beam dimensions, wheel profiles, trolley spacers and travel clearance before selecting or replacing an electric chain hoist trolley. Includes an RFQ checklist for existing monorail systems. -

2026-10-13Wire Rope Hoist Drum Checks Before Rope Replacement
Before fitting a new hoist rope, inspect the drum, rope guide and winding path. This practical checklist helps maintenance teams identify wear, confirm rope compatibility and document what to ask the -

2026-10-11Crane Wheel Replacement RFQ Checklist
Replacing a crane travel wheel takes more than a diameter. This RFQ checklist shows which drawings, measurements and operating details help suppliers match a wheel to the existing crane and rail. -

2026-9-09Why Crane Sheave Bearings Overheat
An unusual temperature rise around a crane sheave hub deserves attention, especially when accompanied by noise, vibration or changes in rope movement. Adding grease may seem like an immediate solution -

2026-9-02How to Choose the Right Electric Wire Rope Hoist Duty Class
Selecting an electric wire rope hoist by rated capacity alone can result in frequent overheating, premature brake wear or unnecessary equipment cost. Two hoists with the same lifting capacity may requ -

2026-8-13How to Select a Gantry Crane for an Outdoor Yard
How to Select a Gantry Crane for an Outdoor Yard Gantry cranes are widely used in outdoor storage yards, precast concrete plants, steel warehouses, ports, railway facilities and equipment-assembly are -

2026-8-12How to Select Horizontal Coil Grabs
How to Select Horizontal Coil Grabs Horizontal coil grabs are below-the-hook lifting devices designed to handle steel, aluminum and other rolled materials stored with the coil eye in a horizontal posi -

2026-8-06Overload Limiter vs Hoist Limit Switch
Overload Limiter vs Hoist Limit Switch An overload limiter and a hoist limit switch are both important protective devices on an electric chain hoist, but they do not perform the same function. One res -

2026-8-01How to Specify an Overhead Crane End Beam
How to Specify an Overhead Crane End Beam An overhead crane end beam, also called an end carriage or end truck, supports the bridge girder and allows the complete crane to travel along the runway. Alt -

2026-7-30How to Select a Hoist for Molten Metal Handling
How to Select a Hoist for Molten Metal Handling Lifting molten iron, steel or other high-temperature materials is very different from ordinary workshop lifting. In addition to the suspended load, the -

2026-6-01Technical Guide: Multi-Fall Systems in Heavy-Duty Chain Hoists
A comprehensive guide to selecting industrial electric chain hoists, highlighting the technical differences between light-duty single-fall systems (such as the 2-ton model in image_5fb25c.png) and hea -

2026-7-20Crane Wheel Wear and Rail Alignment Guide
Crane wheel wear is often caused by rail misalignment, bridge skew or drive problems. This guide explains common wear patterns, inspection points and replacement-wheel selection.


