How lifting equipment works
Jan 13, 2024| Most lifting equipment starts a vertical or vertical and horizontal working stroke after picking up materials. After arriving at the destination, it is unloaded, and then empty travels to the picking location to complete a working cycle, and then carries out the second lifting or transportation. Generally speaking, when the lifting equipment is working, material retrieval, transportation and unloading are carried out in sequence, and the work of each corresponding mechanism is intermittent. Lifting equipment is mainly used to transport individual items. When equipped with a grab bucket, it can transport bulk materials such as coal, ore, and grain. When equipped with a bucket, it can lift liquid materials such as molten steel. Some lifting equipment such as elevators can also be used to carry people. In some use cases, lifting equipment is also the main operating machinery. For example, cranes used for loading and unloading materials in ports and stations are the main operating machinery.
The working principles of lifting equipment are largely the same. Here is a brief introduction to the working principles of the lifts we use most frequently in our daily lives:
An elevator is a kind of elevator equipment composed of a traveling mechanism, a hydraulic mechanism, an electric control mechanism, and a support mechanism. The hydraulic oil forms a certain pressure from the vane pump and enters the lower end of the hydraulic cylinder through the oil filter, explosion-proof electromagnetic reversing valve, throttle valve, hydraulic control check valve, and balance valve, causing the piston of the hydraulic cylinder to move upward, lifting the heavy load. The return oil from the upper end of the liquid cylinder returns to the tank through the explosion-proof electromagnetic reversing valve. Its rated pressure is adjusted through the relief valve, and the reading value of the pressure gauge is observed through the pressure gauge.
The piston of the hydraulic cylinder moves downward, and the hydraulic oil enters the upper end of the liquid cylinder through the explosion-proof electromagnetic reversing valve. The return oil from the lower end of the liquid cylinder returns through the balance valve, hydraulic control check valve, throttle valve, and explosion-proof electromagnetic reversing valve. tank. In order to make the heavy object drop smoothly and the braking be safe and reliable, a balance valve is installed on the oil return line to balance the circuit and maintain the pressure so that the descending speed is not changed by the heavy object. The throttle valve regulates the flow and controls the lifting speed. In order to make the brake safe and reliable and prevent accidents, a hydraulically controlled one-way valve, that is, a hydraulic lock, is added to ensure that it can lock itself safely when the hydraulic pipeline bursts unexpectedly. An overload audio-activated alarm is installed to distinguish overload or equipment failure.
The electrical control system uses explosion-proof buttons SB1-SB6 to control the rotation of the motor and the reversal of the explosion-proof electromagnetic reversing valve to keep the load rising or falling, and adjust the time delay through the "LOGO" program


